Home > Other > Klockner Moeller > ZB Overload Relays >

ZB65-65
Moeller ZB65-65 Thermal Magnetic Overload Relay

 
Alternative Views:
Eaton/Moeller ZB65-65 thermal overload relay that is adjustable from 50 to 65 AMPS, has 1 normally open and 1 normally closed auxiliary contact and mounts to the load side any DILM40 through DILM65 3 pole contactor. The ZB65 series of overloads has phase loss protection along with class 10 tripping, which will cut power to the contactor in 10 seconds or less in an over current condition. For a higher AMP range than the ZB65-65, the ZB65-75 offers an adjustable range from 65 to 75 AMPS and mounts to the same frame size contactors.

Catalog Page / Specifications
List Price: $305.78
Our Price: $96.24
Savings: $209.54

Quantity in Stock:10

Availability : Stock - Can ship today if ordered prior to 4 p.m. EST
Product Code: ZB65-65


Moeller ZB65 Mounting Brackets: 		Check here if you need a separate mounting bracket for attaching this ZB65 overload to DIN rail [Add $15.76]

Qty:  
Description Detailed Specifications
 
Modern motors are built with less metal, which means they dissipate less heat. This calls for the modern protection offered by IEC-style Class 10 overload relays...they trip in 10 seconds under locked rotor conditions. Most motor manufacturers today recommend this type of “close” protection.  All Moeller series ZB65 overload relays come with a host of standard features including phase-failure sensitivity, temperature compensation, test / reset buttons and a tripfree release. The auxiliary contacts of the relay disconnect the motor contactor and signal a fault. Moeller series relays can also be used for protecting EExe hazardous location motors.
Technical Specifications
  • Class 10 overload; trip response from 2 to 10 seconds
  • Ambient compensated, bimetallic overload tripping mechanism
  • Phase failure sensitive to IEC/EN 60947
  • Manual / Automatic reset button
  • Built-in NO and NC auxiliary contacts
  • Direct mount to DILM40, DILM50 and DILM65 contactors
  • Can be mounted separately only standard 35mm DIN rail with additional of ZB65-XEZ bracket