Home > Eaton / Cutler Hammer >

XTCR050D11
Eaton XTCR050D11 reversing 50 AMP contactor

 
Alternative Views:
The Eaton XTCR050D11 reversing contactor is rated for 50 AMPS, 20 H.P. at 230 volt and 40 H.P. at 460 volt 3 phase and comes with an AC or DC rated coil (must specify coil voltage below). Two front mounted auxiliaries with one normally open and one normally closed contacts are included with each contactor along with a mechanical interlock and wiring harnesses for simple and fast installation. The XTCR050D11 is comprised of two XTCE050D contactors that are mechanically interlocked and thermal overload relays are available to form a complete motor starter assembly.

Need help finding the coil voltage? Click on this link for the location of the coil voltage for this contactor.
List Price: $1,202.00
Our Price: $396.87
Savings: $805.13

Quantity in Stock:2

Availability : Stock - Can ship today if ordered prior to 4 p.m. EST
Product Code: XTCR050D11


Eaton Coil Codes*:

Eaton XTOB Frame D Overload relays:

Qty:  
Description Detailed Specifications
 
The XTCR line of IEC power control reversing contactors was engineered to provide highly effective control and protection for a variety of loads, including motors, compressors, pumps, resistive, capacitor banks, isolation, and others. The XTCR050D11 reversing contactor set is comprised of two XTCE040D contactors mechanically and electrically interlocked for forward/reverse operation. These reversing contactors were developed with space restrictions in mind as the mechanical interlock does not increase the overall width of the unit, enabling it to fit in the most compact of areas. This Eaton XTCR set can be mounted on standard 35mm DIN rail or mounted to the back of the panel using the four mounting holes at the base of the unit.

Technical Specifications
  • AC and DC controlled contactors in the same compact frame
  • Low power consumption AC and DC coils
  • Built-in NO or NC auxiliary contacts to 32A
  • Plug-in accessories for reduced installation time
  • Coil replacement on Frames C–N (18–820A)
  • Integrated suppressor 7–150A DC operated contactors and 185–2000A AC and DC operated contactors