Home > Eaton / Cutler Hammer >

XTCR018C21R
Eaton XTCR018C21R 18 AMP Reversing Contactor
 
Alternative Views:
Eaton XTCR018C21R 18 AMP reversing contactor with a 12v50/60Hz AC rated coil and is rated 5 H.P. @ 230 volt, 10 H.P. @ 460 volt 3 Phase. This reversing contactor set comes with 2 normally open and 1 normally closed auxiliary contacts per contactor, screw terminals and can mount on standard 35MM din rail or screwed down to the back of the panel. Two XTCE018C01R contactors that are mechanically interlock comprise the XTCR018C21R and come with line and load side wiring harnesses for easy and safe installation.

Catalog Page / Specifications
List Price: $645.00
Our Price: $237.74
Savings: $407.26

Quantity in Stock:(Out of Stock)

Availability : Out of Stock - Can ship in 1-2 weeks
Product Code: XTCR018C21R
Qty:

Description Detailed Specifications
 
The XTCR line of IEC power control reversing contactors was engineered to provide highly effective control and protection for a variety of loads, including motors, compressors, pumps, resistive, capacitor banks, isolation, and others. The XTCR018C21 reversing contactor set is comprised of two XTCE018C01 contactors mechanically and electrically interlocked for forward/reverse operation. These reversing contactors were developed with space restrictions in mind as the mechanical interlock does not increase the overall width of the unit, enabling it to fit in the most compact of areas. This Eaton XTCR set can be mounted on standard 35mm DIN rail or mounted to the back of the panel using the four mounting holes at the base of the unit.

Technical Specifications
  • AC and DC controlled contactors in the same compact frame
  • Low power consumption AC and DC coils
  • Built-in NO or NC auxiliary contacts to 32A
  • Plug-in accessories for reduced installation time
  • Coil replacement on Frames C–N (18–820A)
  • Integrated suppressor 7–150A DC operated contactors and 185–2000A AC and DC operated contactors