Home > Eaton / Cutler Hammer >

XTCE007B10TD
Eaton XTCE007B10TD 7 AMP contactor

 
Alternative Views:
The XTCE007B10TD is the next generation IEC contactor offering from Eaton with a 24 volt DC coil in a compact 45MM frame size. This 3 pole, 7 AMP contactor can be outfitted with front mounted auxiliaries and for complete motor protection, a thermal overload relay can be directly attached to the load side terminals. Rated  2 H.P. at 230 volt and 3 H.P. at 460 volt, the XTCE007B10TD also comes with 1 normally open base mounted auxiliary contact, screw terminals, and can be mounted on standard 35MM din rail.  As an exact electrical and dimensional replacement for the Moeller DILM7-10 contactor, all the parts and accessories are interchangeable which lowers inventory costs and creates versatility in motor protection.
List Price: $288.15
Our Price: $59.77
Savings: $228.38

Quantity in Stock:8

Availability : Stock - Can ship today if ordered prior to 4 p.m. EST
Product Code: XTCE007B10TD
Qty:

Description Detailed Specifications
 
The XTCE line of IEC power control contactors was engineered to provide highly effective control and protection for a variety of loads, including motors, compressors, pumps, resistive, capacitor banks, isolation, and others. The XTCE007B10T contactor also includes IEC ratings for lighting applications as well. XT is used by customers to enhance equipment safety using contactors and auxiliaries with “mirror contact” approval ratings.

NEED HELP FINDING THE COIL VOLTAGE?
Each contactor comes with a specific coil that matches the control voltage of your application. The most standard voltage in the United States is 24 volt DC, but others such as 48v, 110v and 220v do exist. Always be sure of the coil voltage prior to ordering the contactor as any error will cause the contactor to malfunction and burn out almost immediately. Here is how to determine the coil voltage on this Eaton XTCE contactor: on the front of contactor you will see the voltage in the upper right hand corner just below two screw terminals. You can click here to see a picture of where to look. Please note that the line voltage (480v, 600v, etc) is often confused with the coil voltage. THESE ARE NOT the same. While coil voltages of 480v and 600v do exist, they are extremely rare.
Technical Specifications
  • AC and DC controlled contactors in the same compact frame
  • Low power consumption AC and DC coils
  • Built-in NO or NC auxiliary contacts to 32A
  • Plug-in accessories for reduced installation time
  • Coil replacement on Frames C–N (18–820A)
  • Integrated suppressor 7–150A DC operated contactors and 185–2000A AC and DC operated contactors